|
|
| Footprint: |
|
Concrete
plinth, pillars or rafts made from steel or concrete. |
| Exterior
Walls: |
|
Constructed
from 6x6 or 8x8 inch solid log, usually Eastern White Pine but Red or White
Cedar can be specified. All timbers are treated against infestation and with
microporous preservative. Logs are normally D section grooved on their top and
bottom surfaces to interlock; two silicone and one foam seal ensure water and
draught proofing. Galvanised steel bolts from top to bottom compress the timbers
and seals and are adjustable. Pre-drilled timbers for trunking according to
customer requirements. |
| Windows: |
|
Matching timber double-glazed as standard, with security locks. Customer may
specify otherwise. |
| Doors: |
|
Exterior to customer specification and interior usually panelled solid matching
timber hung in timber frames. Materials, design and furniture to customer specification
if required. |
| Interior
Walls: |
|
Matching
timber tongued and grooved on to stud partition or to customer specification.
|
| Floors: |
|
Ground
floor of 4x2 inch battens, with 2 inch insulation, boarded in matching timber
or to customer specification. First floor joists to regulation standard boarded
to match or to customer specification. Matching skirting boards. |
| Roof: |
|
Cathedral
style matching timber construction or engineered trusses boarded to customer
specification. Purlins and rafters boarded and or felted according to design.
Exterior shingles in Eastern White Pine, Red or White Cedar, or asphalt. Tiles
or slates to customer specification. |
|
